January | 2015 | DIGI TRACK

DESCRIPTION

FOR PERSONS, PETS AND ATHLETES

Where size matters, MT95 is a tiny high performance tracker that could satisfy any customer needs. The product has been designed for personal use or for mounting it on the collar of a pet. The product due to its solid construction and the high tightness index can provide reliable monitoring even under adverse conditions. It is light weighted, just 50gr weight, capable to operate autonomously for enough days, depending on use. The product is ideal for the ones that do not wish to remember to curry a tracker on them.

MT95 INSTALLATION

Starting

With the product deactivated and using the screwdriver included in the package, remove the four screws at the back of the unit to access the SIM card slot.

Insert SIM

Be sure that the SIM card has the relative pin unlock number deactivated. Insert the SIM card on the slot and make sure that it has been mounted correctly. Connect the battery unit by linking together the two plugs that end to a red and black wire. Replace the lid carefully so that the elastic part around the unit to fit properly and screw the four screws without applying excessive pressure

Charge the device

Place the unit on the charging base and connect it via the usb cable either to the charger included in the package or to any relative pc port. For proper battery management, with the tracker deactivated, let it charge for at least three hours.

Device Parameterization

The tracker is partially parameterized. What remains in order to assure the proper operation of the device is the end user to declare the selected mobile telecommunications service provider via which the tracker will communicate with the server (cosmote, Vodafone, wind etc.). With the tracker activated, by pressing for three seconds the button indicated as such, we conclude the process described above by transmitting a message SMS, that contains the SIM card number, inserted in the tracker.

The content of the message exactly as it should be sent is shown below:
facid,123456,gprs,addr=digitrack.gr,port=1000,name=,pass=,APN=,id=1,mode=0;

This message applies to all mobile telecommunication networks, differentiated only at the APN parameter the value of which changes depending on the provider chosen by the end-user and is inserted immediately after the “APN =”. The APN value could be immediately provided by the mobile telecommunication service provider stores network. If there exists a username and password these are entered immediately after “name=” and “pass=” respectively.

An example of a message is shown below:
facid,123456,gprs,addr=digitrack.gr,port=1000,name=SCOTT,pass=FOIL15,APN=internet,id=1,mode=0;

(this is an example of a parameterization message with a mobile telecommunication service provider whose APN is “internet”, username the word “SCOTT” and password the word “FOIL15”).
As soon as the process described above is concluded, the tracker is ready to operate. What remains is to create a contact on the device the application DigiTrack is installed, taking into account that the IMEI of the tracker, which is affixed to its packaging, should be entered on the phone number of said contact. The end-user should declare the IMEI of the device the application DigiTrack is installed, when ordering the tracker at the MCK e-shop, to gain access to the mail server of the application.

Note: Buying the tracker is accompanied by free lifetime subscription of DigiTrack application. The end-user should declare the IMEI of the device the application DigiTrack is installed, when ordering the tracker at the UBILUS e-shop, to gain access to the mail server of the application.

PRODUCT FEATURES TABLE

DESCRIPTION

FOR FLEET MANAGEMENT AND BURGLAR

The MVT600 is the ideal fixed solution for vehicles since besides the vehicle tracking activity, it supports several regional functions related to the vehicle behavior, its safety etc. Using the U-blox 6 technology ensures maximum accuracy in monitoring and vehicle tracking while supports AGPS technology for alternative vehicle tracking via phone network in areas where it is not possible to collect data from satellites. The embedded acceleration and vibration sensors provide extra parameterization of the tracker’s operation in accordance to customer and applications needs, while there is the ability to directly interconnect the tracker to the vehicle immobilizer to get additional safety. Supports a set of optional external sensors such as gasoline, temperature, etc., as well as three digital inputs and three outputs and analog inputs to remotely control functions in the vehicle. The MVT600 is the most complete solution for vehicle applications, especially where the tracker size required is not limited.

MT600 INSTALLATION

Starting

Using a screwdriver Phillips type, remove the screw at the back of the unit, remove the cover with the indication SIM to access the SIM card slot.

Insert SIM

Be sure that the SIM card has the relative pin unlock number deactivated. Insert the SIM card on the slot in the same direction as the indication, i.e. with the metal pins of the SIM at the bottom and the slot of the card to be inserted first into the tracker. Activate the tracker and as soon as you are assured that it is activated place the cover of the unit back. Make sure that it has been mounted correctly and screw the screw without applying excessive pressure.

Charge the device

Connect the 12 pin plug at the back side of the tracker and connect the tracker at a 12V or 24V source via the black (GND) and red (+SUPPLY) wires. For proper battery management, let the tracker charge for at least three hours.

Device Parameterization

The tracker is partially parameterized. What remains in order to assure the proper operation of the device is the end user to declare the selected mobile telecommunications service provider via which the tracker will communicate with the server (cosmote, Vodafone, wind etc.). With the tracker activated, we conclude the process described above by transmitting a message SMS, that contains the SIM card number, inserted in the tracker.

The content of the message exactly as it should be sent is shown below:
0000,A21,1,digitrack.gr,1000, the APN of the provider, username if that exists, password if that exists

This message applies to all mobile telecommunication networks, differentiated only at the APN parameter (blue fonts) the value of which depends on the provider selected by the end-user. The APN value could be immediately provided by the mobile telecommunication service provider stores network. If there exists a username and password to connect, these are entered in the message at the positions with the red and green fonts.

Otherwise the message will have the form as below:
0000,A21,1,digitrack.gr,1000,internet,

(this is an example of a parameterization message with a mobile telecommunication service provider whose APN is “internet”, without username and password).

As soon as the process described above is concluded, the tracker is ready to operate. Be sure that all external antennas have been connected. What remains is to create a contact on the device the application DigiTrack is installed, taking into account that the IMEI of the tracker, which is affixed to its packaging, should be entered on the phone number of said contact.

Note: Buying the tracker is accompanied by free lifetime subscription of DigiTrack application. The end-user should declare the IMEI of the device the application DigiTrack is installed, when ordering the tracker at the UBILUS e-shop, to gain access to the mail server of the application.

PRODUCT FEATURES TABLE

DESCRIPTION

FOR PERSONS, ELDERLY PEOPLE, ATHLETES, PETS, VEHICLES

The MT90 is a tracker of latest technology, either for personal use or for use to pets, due to its limited volume, the tightness level and the great autonomy offered. It is a tracker of technology SIRF IV guaranteeing optimum quality satellite signal reception, download speed and high precision. By integrating sensors like the accelerometer the device could adapt its operation based on the user activities, being operated for 60 hours in power saving mode. In parallel it bears a microphone to record surrounding noise, that is a particularly important parameter especially in cases where the tracker is used by children, Alzheimer patients etc.

MT90 INSTALLATION

Starting

With the product deactivated and using the screwdriver included in the package, remove the two screws at the back of the unit to access the inside of the tracker. Remove the battery so that the SIM card slot to be revealed.

Insert SIM

Be sure that the SIM card has the relative pin unlock number deactivated. Insert the SIM card on the slot and make sure that it has been mounted correctly. Place the battery to the unit, and then as soon as you are sure that it fits properly, screw the two screws without applying excessive pressure.

Charge the device

Device Parameterization

The tracker is partially parameterized. What remains in order to assure the proper operation of the device is the end user to declare the selected mobile telecommunications service provider via which the tracker will communicate with the server (cosmote, Vodafone, wind etc.). With the tracker activated, we conclude the process described above by transmitting a message SMS, that contains the SIM card number, inserted in the tracker.

The content of the message exactly as it should be sent is shown below:
0000,A21,1,digitrack.gr,1000, the APN of the provider, username if exists, password if exists

This message applies to all mobile telecommunication networks, differentiated only at the APN parameter (blue fonts) the value of which depends on the provider selected by the end-user. The APN value could be immediately provided by the mobile telecommunication service provider stores network. If there exists a username and password to connect, these are entered in the message at the positions with the red and green fonts.

Otherwise the message will have the form as below:
0000,A21,1,digitrack.gr,1000,internet,,

(this is an example of a parameterization message with a mobile telecommunication service provider whose APN is “internet”, without username and password).

As soon as the process described above is concluded, the tracker is ready to operate. What remains is to create a contact on the device the application DigiTrack is installed, taking into account that the IMEI of the tracker, which is affixed to its packaging, should be entered on the phone number of said contact.

Note: Buying the tracker is accompanied by free lifetime subscription of DigiTrack application. The end-user should declare the IMEI of the device the application DigiTrack is installed, when ordering the tracker at the UBILUS e-shop, to gain access to the mail server of the application.

PRODUCT FEATURES TABLE

DESCRIPTION

RECREATIONAL CRAFTS, VEHICLES & MOTORCYCLES

The MVT100 is a tracker designed specifically for vehicles like motorcycles, offering latest technology in terms of positioning functionality in combination to low consumption and IP66 tightness level. It is easy to install, just connect it to a power supply, while it provides alternatively to the end-user the ability to utilize the two digital and the one analog input to transmit data concerning the operation of the vehicle. In parallel it is provided via the tracker one output which could be employed for remote management functions adding a further option towards vehicle management.

MT100 INSTALLATION

Starting

With the tracker deactivated, use a screwdriver Phillips type, remove the screw at the back of the unit, to access the inside of the tracker.

Insert SIM

Be sure that the SIM card has the relative pin unlock number deactivated. Insert the SIM card on the slot and make sure that it has been mounted correctly. Activate the tracker and as soon as you are assured that it is activated place the cover of the unit back. Make sure that it has been mounted correctly and screw the screw without applying excessive pressure.

Charge the device

Connect the tracker at a 12V or 24V source via the black (GND) and red (+SUPPLY) wires at the back side of the unit. For proper battery management, let the tracker charge for at least three hours.

Device Parameterization

The tracker is partially parameterized. What remains in order to assure the proper operation of the device is the end user to declare the selected mobile telecommunications service provider via which the tracker will communicate with the server (cosmote, Vodafone, wind etc.). With the tracker activated, we conclude the process described above by transmitting a message SMS, that contains the SIM card number, inserted in the tracker.

The content of the message exactly as it should be sent is shown below:
0000,A21,1,digitrack.gr,1000, the APN of the provider, username if that exists, password if that exists

This message applies to all mobile telecommunication networks, differentiated only at the APN parameter (blue fonts) the value of which depends on the provider selected by the end-user. The APN value could be immediately provided by the mobile telecommunication service provider stores network. If there exists a username and password to connect, these are entered in the message at the positions with the red and green fonts.

Otherwise the message will have the form as below:
0000,A21,1,digitrack.gr,1000,internet,

(this is an example of a parameterization message with a mobile telecommunication service provider whose APN is “internet”, without username and password).

As soon as the process described above is concluded, the tracker is ready to operate. Be sure that all external antennas have been connected. What remains is to create a contact on the device the application DigiTrack is installed, taking into account that the IMEI of the tracker, which is affixed to its packaging, should be entered on the phone number of said contact.

Note: Buying the tracker is accompanied by free lifetime subscription of DigiTrack application. The end-user should declare the IMEI of the device the application DigiTrack is installed, when ordering the tracker at the UBILUS e-shop, to gain access to the mail server of the application.

PRODUCT FEATURES TABLE